中文
English
The solution to fogging on door and window glass is to replace the glass or take it apart, have a professional clean the inside and then reassemble the pieces and apply glue. At present, insulating glass is mostly used in places such as broken bridge aluminum doors and Windows, glass roofs, plastic-steel doors and Windows, and curtain walls. However, to ensure the sound insulation, heat insulation and aesthetic appearance of the Windows, the quality of the insulating glass in the doors and Windows must also be good.
Suzhou insulating glass manufacturers tell you the function of insulating glass desiccants
There are mainly three: adsorbing moisture sealed in the air; Adsorb volatile organic solvents and water vapor that enters the air layer during the service life of insulating glass. The purpose is to maintain a qualified initial dew point for insulating glass. Therefore, the condition for choosing an appropriate desiccant is that it must simultaneously meet the three functions that a desiccant should possess. If the desiccant has poor adsorption capacity and cannot effectively adsorb the moisture that enters the air layer through diffusion, it will lead to the accumulation of moisture in the air layer, an increase in moisture pressure, and a rise in the dew point of insulating glass. As a result, the possibility of fogging is extremely high. Additionally, when choosing desiccants, their respective properties must be comprehensively considered. The selection of desiccants is directly related to the type of insulating glass adhesive used. It must be considered in combination.
The above are the reasons why air enters insulating glass and the corresponding solutions. Have you understood? If you have encountered the same problem in your life, then come and take a look at how to make the air in insulating glass disappear. I believe that through the above introduction, the fog in insulating glass will disappear and the glass will regain its original brightness. Friends who want to know about the air intake problem in insulating glass, come and learn about it quickly. I believe that through the above introduction, Then we can effectively and quickly remove the mist in the insulating glass.
